Shell AeroShell

AeroShell Oil 65

SAE Grade: SAE 30

AeroShell 65 straight mineral oils are blended from selected high viscosity index base stocks. These oils do not contain additives except for a small quantity of pourpoint depressant (which is added when improved fluidity at very low temperature is required) and an anti-oxidant.

    Sub Total: $30.57

    Warehouses:

    In stock

    Detailed Product Description

    AeroShell Oil 65 The suffix for each grade corresponds to the viscosity of the oil at 210F in Saybolt Universal Seconds.

    The appropriate grades of these AeroShell 65 Oils are approved for use in four-stroke cycle (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J-1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive.

    AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.

    Specifications, Approvals & Recommendations

    • The U.S. Specification SAE J-1966 replaces MIL-L-6082E. Although it was planned to replace the British Specification DERD 2472 with a DEF STAN specification this has now been put into abeyance and instead the SAE specification has been adopted.
    • U.S. : Approved J-1966 SAE Grade 30
    • French : (AIR 3560/D Grade SAE 30)
    • NATO Code : O-113 Obsolete