Delo 400 LE Synthetic SAE 5W-30
Delo® 400 LE Synthetic SAE 5W-30 is a mixed-fleet motor oil recommended for naturally aspirated and turbocharged four-stroke diesel engines and four stroke gasoline engines in which the API CJ-4 or API SN service categories and SAE 5W-30 viscosity grade are recommended.
Detailed Product Description
Delo 400 LE Synthetic SAE 5W-30 is an API CJ-4 performance heavy duty engine oil specifically formulated for on highway applications including 2010 compliant low emission diesel engines with Selective Catalytic Reduction (SCR), Diesel Particulate Filter (DPF) and Exhaust Gas Recirculation (EGR) systems. It is fully compatible with previous API Oil Service Categories. It delivers value through:
Fuel Economy Improvement — Tests show up to 4.5% fuel economy improvement with short haul trucks (Class 6) and 2% with long haul trucks (Class 8) when compared to SAE 15W-40 oil.
Promotes consistent cold engine starting — Low Viscosity Synthetic Base Stocks promote consistent cold engine starting. Optimal for diesel engines operating in sub-zero temperature.
Minimized operating costs — Exceptional soot dispersancy and wear control help protect cylinders, pistons, rings, and valve train components contributing to maximum vehicle utilization and minimal downtime.
Delo 400 LE Synthetic SAE 5W-30 helps keep piston rings clean and free for optimum combustion pressure and minimal wear. Delo 400 LE Synthetic SAE 5W-30 minimizes valve and piston crown land deposits, thus managing oil consumption. Its high level of ashless dispersants keeps fuel soot in suspension and helps to avoid filter plugging, abrasive wear, viscosity increases, and oil gelation. These problems could cause excessive engine wear and bearing failure, without prior warning.
Optimized additive chemistries combined with synthetic base stocks control oxidation, sludge, and undue thickening between oil drains. Delo 400 LE Synthetic SAE 5W-30 motor oil's antiwear technologies protect against valve train wear and scuffing of highly loaded parts operating under boundary lubrication. A defoaming additive helps prevent air entrainment.
Delo 400 LE Synthetic SAE 5W-30 is excellent for use in new advanced engines developed to meet the latest emissions and reliability standards and in engines equipped with features like super-charging, turbocharging, direct injection, higher power density, intercooling, full electronic management of fuel and emissions systems, exhaust selective catalytic reduction, exhaust gas recirculation, and exhaust particulate filters
Delo 400 LE Synthetic SAE 5W-30 is recommended for use in older engines in conditions when SAE 5W-30 viscosity grade is recommended, as well as in today's most modern low emission designs.
Delo 400 LE Synthetic SAE 5W-30 is recommended for use in Caterpillar engines in off-highway or construction applications in conditions when SAE 5W-30 viscosity grade is recommended.
Delo 400 LE Synthetic SAE 5W-30 is approved for:
•API Service Categories CJ-4, SN
•Cummins CES 20081
•DEUTZ DQC IV-10 LA
•Detroit Diesel DDC Power Guard 93K218
•Mack EO-O Premium Plus
•MAN M 3677, M 3477
•MB-Approval 228.51 and MB-Approval 228.31
•MTU Category 3.1
•Renault VI RLD-3
•Voith Retarder B
Delo 400 LE Synthetic SAE 5W-30 meets the requirements of:
•ACEA European Service Categories E6, E7, E9