Chevron Chevron

Chevron Open Gear Lubricants 100 NC

Chevron Open Gear Lubricants 100 NC are formulated to minimize wear and provide shock load protection during typical operations.

    Sub Total: $4.14

    Warehouses:

    In stock

    Detailed Product Description

    Chevron Open Gear Lubricants deliver value through:

    • Low environmental impact — The carrier solvent contained in Chevron Open Gear Lubricant is a non-ozone depleting diluent. Chevron Open Gear Lubricants also pass the EPA’s Toxicity Characteristic Leaching Procedure (TCLP) test.
    • Long equipment life — High film strength provides excellent anti-wear protection to gear teeth under high, shock load conditions.
    • Ease of application — Easily applied with brushes, swabs or through automatic lubrication systems.

    FEATURES

    Chevron Open Gear Lubricants are black, viscous lubricants formulated with an asphaltic base and diluted with a non-chlorinated solvent for easy application by hand or through automatic lubrication systems.

    They provide a high film strength coating on gear teeth to minimize wear. Chevron Open Gear Lubricants are designed to provide tacky, tenacious lubricant films on open gears operating under severe shock load conditions.

    Chevron Open Gear Lubricants contain a nonchlorinated diluent that eases the application of these lubricants onto the gears. The diluent then evaporates, leaving a tacky lubricant film on the gear teeth.

    They can also be used to lubricate chains, sprockets, wire rope, and cables. When used as a cable coating, the diluent allows the lubricant to penetrate into the core, thus carrying the lubricant into the individual strands and minimizes wear as the cable is run through sheaves or onto a winch drum.

    APPLICATIONS

    Chevron Open Gear Lubricant 100NC meets the Raytheon G648453 specification.

    Chevron Open Gear Lubricants are recommended for many types of open gears, wire ropes, and cables.

    They can be applied by brush, by swab or by automatic lubrication systems. All grades provide lubrication for mining equipment including: •

    • girth and pinion gears on rod and ball mills;
    • rack and pinion gears on shovel dipsticks;
    • swing and pinion gears on top of the lower frame of shovels and draglines, which are sometimes served with an automatic lubrication system.