Meropa Synthetic EP ISO 150
Meropa® Synthetic EP ISO 150 lubricants are recommended for many types of enclosed industrial gearboxes, especially those running continuously at temperatures up to 107°C (225°F) or exposed to very cold temperatures as low as -46°C (-50°F), or under severe service conditions, such as heavy loads or low speeds. These products also provide excellent protection for bearings operating under similar conditions
Detailed Product Description
Meropa Synthetic EP 150 lubricants are high quality industrial EP gear lubricants.
Meropa Synthetic EP ISO 150 lubricants are developed from an advanced formulation that provides exceptional load carrying and antiwear properties; protection against rust, corrosion, foaming, and oxidation; and excellent demulsibility. This formulation provides outstanding performance in most types of industrial gearboxes, exemplified by the FZG pass stage results of >12.
These products possess very high shear stability even under heavily loaded, high speed conditions in industrial gears.
The low pour point and very good low temperature fluidity of Meropa Synthetic EP lubricants provide excellent lubrication during startup at sub-zero temperatures, while their exceptional viscositytemperature characteristics provide dependable lubrication at high temperatures.
A unique property of the synthetic base oil is a low traction coefficient, resulting in improved gear efficiency, energy savings, less friction, less wear, and lower operating temperatures compared to conventional mineral oil products.
Due to the very high viscosity index, these products provide a higher oil viscosity at operating temperature than a mineral oil product of the same ISO grade. This results in increased oil film thickness and better antiwear protection for both bearings and gears.
Drain intervals can be extended longer than conventional mineral oil products. That means fewer oil changes, reduced maintenance costs, and less used oil disposal.
APPLICATIONS
They can promote long service life for applications where mineral oil products deteriorate too rapidly or lead to premature failures.
Meropa Synthetic EP 150 lubricants meet the requirements of:
- AGMA 9005 and qualify as AGMA EP gear lubricants
- DIN 51517-3 (CLP)
- Joy TO-SMEP (ISO 220) and TO-SHEP (ISO 320)
- U.S. Steel 224
Meropa Synthetic EP ISO 150 lubricants meet the requirements of MAG Cincinnati, Cincinnati Machine P-35 (ISO 460), P-59 (ISO 320), P-74 (ISO 220), P-77 (ISO 150).
Meropa Synthetic EP 150 lubricants deliver value through:
- Excellent thermal and oxidation stability — The synthetic hydrocarbon base oils used in these products provide outstanding stability promoting long lubricant and equipment life.
- High viscosity index and low pour point — These result in very broad operating temperature ranges -46°C to 149°C (-50°F to 300°F) when compared with conventional mineral oil based lubricants.
- Energy savings — The synthetic base oil will typically increase gear efficiency, resulting in less power consumption.
- Extended drain intervals — Long lubricant life, low maintenance costs and reduced used oil disposal when compared to mineral oil products.
- Compatibility — Meropa Synthetic EP lubricants are compatible with most mineral oil based industrial EP/R&O gear lubricants, as well as with most PAO based synthetic industrial EP and R&O gear lubricants.
