Shell Corena

Shell Corena S4 R 46

Shell Corena S4 R46 is primarily an advanced synthetic air compressor oil designed to deliver the highest performance lubrication of rotary sliding vane and screw air compressors. It uses a unique advanced additive system to provide excellent protection and performance for compressors running with oil maintenance intervals of 10,000 hours and up to 12,000 hours under certain conditions. Shell Corena S4 R 46 is also perfectly suitable to cover applications where a synthetic bearing & circulating oil or R&O oil (ISO VG 32-68) is required.

    Sub Total: $46.22

    Warehouses:

    In stock

    Detailed Product Description

    Shell Corena S4 R 46 Main Applications

    • Rotary sliding vane and screw air compressors
      Shell Corena S4 R is suitable for oil-flooded/oil injected, single or two-stage compressors, operating at pressures of in excess of 25 bar and with air discharge temperatures of over 100C (including intermittent operation under these conditions).
    • Severe service conditions
      May also be used where exceptionally high ambient temperatures are found, when the oil temperature cannot be reduced to normal levels.
    • Bearing & Circulating Oil
      Perfectly suitable to cover applications where a synthetic bearing & circulating oil or R&O oil (ISO VG 32-68) is required and will provide benefits due to increased resistance to deposit formation, improved low temperature fluidity, and lowering equipment operating temperatures. When a higher viscosity grade synthetic oil is required we recommend to use Shell Morlina S4 B grades for such applications

    Compatibility & Miscibility

    Miscibility

    Shell Corena S4 R 46 oils are fully miscible with mineral oils, although dilution with mineral lubricants will markedly reduce its performance. Care must be taken to avoid mixing Shell Corena S4 R 46 with certain other types of synthetic fluids. Contact your Shell representative for further information.

    Seal Compatibility

    Shell Corena S4 R 46 oils are compatible with seal materials specified for use with mineral oils.